Led Minimotors controller for Dualtron.
This LED controller is compatible with Dualtron Thunder, Compact, DT3 electric scooters.
The latter allows the management of column Led bars, while having its own Led to illuminate the banana just after the deck.
This controller is compatible with Led bars with 3-cable plugs. It will not be usable if you have LED bars with 4 cable connectors. ( See picture for comparison)
Features of the Dualtron Led Controller
This Led controller is an original Minimotors part, allowing the management of the column Led bars as well as its own Led which are six in number and which allow to customize the banana. It allows you to manage the Led colours, the scrolling speed, the scrolling animations with the original remote control supplied with the scooter.
Installation of the Dualtron Led Controller
The installation of the Led controller is simple. First you have to unscrew the two screws fixing the controller's protection cover, then unscrew the two screws fixing the Led controller to the chassis. Then you just have to unplug the two led bars and the power cable and install the new controller. Be careful not to tighten the LED controller fixing screws too much, otherwise the top one can go to the fork and rub on it. It only remains to repeat the steps above in the opposite direction for the reassembly.